Welcome to beta three of the Lucent Technologies driver version 5.55.

To install the driver, open a command prompt window and type ltinst
from the drive or directory where you unzipped the package to.  (You can
also click on the ltinst.cmd icon if you are using the GUI to access the
files - the install window will not close until you are done reading it.)
A copy of your config.sys will be saved in the root direcotry of the boot
drive.  The files will be copied to their correct locations.

If your LANG variable is set to a language the script knows about, you should
see the install messages in your language.  If not, the messages will be
in English.

If you have any bug reports, (traps, hangs), please send them to me with:

- the version of the driver - (use a /v switch on config.sys or use the ATI
- command in a terminal window) the location of the trap  - (the cs:ip)
- a general idea of how it occured - (trap during boot - trap when connecting)


If you cannot get the driver to recognize your card, send me the output from
the following command:

rmview /dc > somefile.txt

Good luck.

-Eric

eric_bentley@iname.com
