AmbiCom WL1100B-PCI Card NDIS driver for OS/2

================================ os2warp.be =======

October, 2003

(c) Jens Glathe, 2003.
All rights Reserved.
Brought to you via os2warp.be

Support can be obtained via http://www.os2warp.be/support/.
OS/2 and Wireless homepage: http://www.os2warp.be/wifi/.


NOTE: This is a beta version of the driver, NO official release. Please
keep it confidential.

Installation instructions:

Copy the files manually to the \IBMCOM\MAC\ directory.

Use MPTS to configure the driver parameters.

Additional Debug option:

The "Debug verbosity level" can adjust the amount of information which
will be written to the LANTRAN.LOG file. The value is a bit field, and the
bits have the following meaning:

0x0001 "...is loaded and operational."
0x0002 Link Status messages
0x0004 Card Services messages, except for socket information
0x0008 NDIS-messages
0x0020 IOCTL-messages
0x8000 Socket information

WifiStat Tool:

Use WifiIcon.cmd to create an icon on the desktop. The tool shows the card
status and the signal strength as a bar. You can save and select up to 4
profiles for connection settings - the last active profile will be loaded
at the next start of the WifiStat tool.

Things that need to be tested:

practically everything, but especially very large data transfers (single
direction and concurrent, if possible using different protocols),
suspend/resume, card removal/card insertion. A good test is enabling
DEBUG_LEVEL=0xFFFF in the protocol.ini and running the WifiStat Tool -
This generates concurrent accesses to the driver from two different
sources.

Bug Reports:

Please report bugs to LinkSysBug@os2-wireless.de.





