		  ===========================
		  R E L E A S E    N O T E S
		  ===========================

	    Broadcom Gigabit Ethernet DOS/OS2 NDIS2 Driver

			 version 1.19

	    Copyright (c) 2002 Broadcom Corporation
		     All rights reserved.
		         Oct 17, 2002



10/17/02 - v1.19
        Fixed problem with forced LineSpeed and Duplex.

10/16/02 - v1.18
        Fixed problem with ASF enabled.

10/16/02 - v1.17
        Fixed problem with system appeared to hang when cable was removed.

08/13/02 - v1.14-
        Fixed problem with EMM386.
        Used PXE's LM.
        Clean out NIC's Status Block during initialization to prevent spur-interrupt after
        initialization.
        Slim down Host memory used by adpater (dropped 48K memory foot print).

07/25/02 - v1.13-
	Hanle Transmit Segment equal to 0 for OS2 Granite trap.

07/12/02 - v1.12-
        Fixed problem with the RPL boot up, the driver hangs while downloading file image.
        The Boot Block Configuration file *.cnf MUST specify in the DRV Type's second field
        the additional memory (53KB-60KB) used by the driver as follows:

         DRV BBLOCK\NDIS\B57.DOS ~ 53 ~

        Block re-entrance during Interrupt handler loop in OS2 driver.
        Hanle Transmit Segment equal to 0 for OS2 Granite trap-this does not work.

        Fixed a low performance problem with BCM5701 Serdes LOMs with Copper Trace
        media. As in the PXE v2.1.2.

        Port number correction.

05/10/02 - v1.11-
        Minor Modification to accommodate IBM IEEE 802.2 Protocol.

04/29/02 - v1.10-
        Drivers allocate system's memory for adapter use to reduce the file size.

04/22/02 - v1.09-
        Removed unused adapter's specific features.

04/19/02 - v1.08- 
        1. Latest LM from ODI16 v1.17 that have following fixes:
            a) DMA once bit with PCI-X
            b) LINK polarity bit for 5703/02.
            c) Removed the runt packet configuration setup.
            d) The PHY ADC Decimator fix.
            e) Additional delays are needed during PCI config B2B access.
            f) 40us delay after GPIO access.
        3. Added PortNum Keyword.
        4. New banner displays other NICS present in the system (up to 8).
        5. Support up to 4 adapters.
        6. Os2 Traps during Fibre Auto-Negotiation.

04/03/02 - v1.07- 
        Removed debug statements conflict with retail OS/2 kernel.

03/27/02 - v1.06- 
        Fixed inconsistent Fibre Auto-Negotiation.

03/25/02 - v1.05- 
	Fixed high data rate Netbeui protocol's flowcontrol, Added Fiber LED control,
        and fixed locked up when cable is disconnected and re-connected during file
        transfer.

03/07/02 - v1.04- 
        Added 16a6, 16a7, 164d device ids. Drivers utilized ODI16 v1.15's LM supports
        nic send bds and wirespeed.

02/25/02 - v1.03- 
        Added LineSpeed, Duplex, and FuncNum keywords.

02/08/02 - v1.02- 
	Fixed BusNum and DevNum keywords to pickup the assigned adapter when there
	are more than one adapter present. Utilized ODI16 v1.14's LM modules.

02/07/02 - v1.01- 
	Add OS2 support. Current drivers does not support any Ax firm ware fixes.

02/06/02 - v1.00- 
	First Engineering Release.