                                                                Jan. 1996
                            DE-620 Ethernet Card
                        NetBIOS Emulator Installation
                        =============================

Copyright (c) 1996 by D-Link Corporation. All rights reserved.

The D-Link's NetBIOS Emulator is a standardized network interface program that
allows this adapter to run NetBIOS-based network operating systems like the
IBM PC LAN Program and others.  No software modification or additional
installation is necessary. All operations, as well as installation procedures
for the network operating system, remain the same.

The following lists the files that will be used in this installation:

Files           Description
------------    ------------------------------
DE-620.EXE      DE-620 Driver Program 
NBIOS.EXE       NetBIOS Emulator Program

To install the NetBIOS Emulator, follow these steps:

1. Load the driver program.  Type:

              >DE-620

2. Load the NetBIOS Emulator program, NBIOS.EXE.  This program is memory-
   resident and will stay in your computer's memory until the system is turned
   off or until you reboot.  Type:

              >NBIOS [/Sm] [/Ck]

   The parameters after NBIOS are optional.  Their functions are:

    /Sm specifies the maximum number of sessions allowed in your computer;
        where m ranges from 1 up to 254.If this parameter is not specified,
        the default values of 32 will be used.

     /Ck specifies the maximum number of NetBIOS commands that can be used in
         your computer; where k ranges from 1 up to 255.  If this parameter
         is not specified, the default value of 32 will be used.

Your computer is now ready to run a NetBIOS-based network operating system.


