                                                                  Jan. 1996
                         DE-620 Ethernet Card
                  Packet Driver Installation for D-Link's TCP/IP
                  ==============================================

Copyright (c) 1995 by D-Link Corporation. All rights reserved.

****************************************
* Packet Driver Program for D-Link TCP *
****************************************

There are two methods of running the D-Link's TCP/IP program.  They are
described below.

METHOD 1:

If you are using the DE620PD.SYS program, the following statement must be
included in your CONFIG.SYS file:

     DEVICE = DE620PD.SYS  <packet_int_no>

You can place this line anywhere in the CONFIG.SYS file.

METHOD 2:

If you are using the DE620PD.COM program, follow these steps:

1.  Modify your AUTOEXEC.BAT file to include the following line:

         set HOSTS=<PATH>

    <PATH> here is the directory where the D-Link TCP/IP programs reside.

2. Execute DE620PD.COM by typing the following:

         >DE620PD  <packet_int_no>

3. Execute TCPSTART.EXE to start TCP/IP.

You are now ready to use TCP/IP.


