[ Deutsche bersetzung folgt unten ]

// to those people who still don't understand the meaning of REQUIRED:
// Do not ask if I need this info, simply generate it - even if you think you
// can't do that - and attach it  -  UNCONDITIONALLY, ALWAYS, WITHOUT ASKING!

// Before sending the report.* files, check if they contain data! The first line
// of report.trc and report.atapi shows the version of the actually loaded
// driver and the options given. The first line of report.dmp shows the build
// date of the DumpIDE utility

*******************************************************************************
* If the report.* files are missing without COMPELLING reason I'll simply     *
* ignore the whole problem report without notice.			      *
*******************************************************************************

I REQUIRE you to attach the following data to EACH bug or problem report:

Make sure that you run the STANDARD version of DaniS506.ADD rather than the ones
from the /nodebug or /nodebug/cmprssed paths in the distribution archives! The
latter two are unsupported and meant to be used on severely space constrained
boot media only. I've included them for your convenience only and it's up to YOU
to take possible risks doing so.

Add the option /DEBUG:-31 to the DaniS506.ADD line in CONFIG.SYS, and reboot.
Then grab

 - the output from "COPY IBMS506$ report.trc"
 - the output from "DiskInfo cviI > report.txt"
 - the output from "DumpIDE b > report.dmp"

If there are non-zero numbers in the "Total errors" lines of the output from
"DiskInfo cv", run and grab

 - the output from "SmartCtl -a DiskID > report.smart"

where 'DiskID' is the id of the disk with errors, f.e. '0m' if DiskInfo shows
errors for unit '0/m'.

If you are experiencing problems related to any kind of ATAPI unit (CD, DVD,
burners, ...), then grab

 - the output from "COPY ATAPI$ report.atapi"

If you cannot boot from disk using DaniS506.ADD, try the above from a
bootable floppy, CD or ZIP.

If this fails as well, try again with the additional option /FORCEGBM /!BM

If all of the above fails, but a boot with IBM1S506.ADD works, then grab
at least

 - the output from "DumpIDE b > report.dmp"
 - the output from "BldLevel DaniS506.ADD > report.bld"

Send the info to "Daniela Engert" <dani@ngrt.de> please. Don't forget to provide
a valid "reply-to" field in the header of your email, I won't edit it by hand!

If you are experiencing problems with CD burning try disabling busmaster DMA
(/A:x /U:y /!BM) first; some writers have problems with DMA mode.

------------------------------------------------------------------------------

// An diejenigen, die die Bedeutung von FORDERN nicht kennen:
// Nicht erst fragen, ob ich die Info bentige, sondern einfach erzeugen wie
// beschrieben - auch wenn man nicht glaubt, da das geht - und als Anhang
// mitschicken - AUF JEDEN FALL, IMMER, OHNE FRAGEN!

// Bevor Sie die Dateien abschicken, vergewissern Sie sich, da da auch Inhalt
// drin ist! In der ersten Zeile von report.trc und report.atapi steht die
// Versionsnummer des tatschlich geladenen Treibers und die angewhlten
// Optionen. In der ersten Zeile von report.dmp steht das Build-Datum des
// DumpIDE Utility.

******************************************************************************
* Wenn die genannten Dateien ohne ZWINGENDEN Grund fehlen, ignoriere ich den *
* gesamten Problemreport ohne weitere Rckmeldung.			     *
******************************************************************************

Ich FORDERE, da JEDER Problem- oder Fehlerbeschreibung die folgenden Dateien
beiliegen:

Stellen Sie sicher, da Sie die STANDARD-Version von DaniS506 benutzen und nicht
diejenigen aus den Verzeichnissen /nodebug/ oder /nodebug/cmprssd im Distribu-
tionsarchiv! Diese letzteren beiden sind nicht von mir untersttzt und sind nur
zum Einsatz auf Bootmedien mit uerst geringem Platzangebot gedacht. Ich habe
diese Versionen nur zu Ihrer Erleichterung beigepackt und es liegt alleine an
IHNEN die daraus mglicherweise entstehenden Probleme zu lsen.

Ergnzen Sie die Zeile mit DaniS506.ADD in CONFIG.SYS um die Option /DEBUG:-31
und booten Sie neu. Danach besorgen Sie sich

 - die Ausgabe von "COPY IBMS506$ report.trc"
 - die Ausgabe von "DiskInfo cviI > report.txt"
 - die Ausgabe von "DumpIDE b > report.dmp"

Falls in der Ausgabe von "DiskInfo cv" in den Zeilen "Total errors" Werte
ungleich 0 auftauchen, besorgen Sie sich zustzlich

 - die Ausgabe von "SmartCtl -a DiskID > report.smart"

wobei 'DiskID' die Bezeichnung fr die Platte mit Fehlern ist, z.B. '0m' falls
"DiskInfo cv" Fehler fr die Platte '0/m' anzeigt.

Falls Probleme im Zusammenhang mit irgendwelchen ATAPI-Gerten (CD, DVD, Brenner,
...) auftauchen sollten, besorgen Sie zustzlich

 - die Ausgabe von "COPY ATAPI$ report.atapi"

Falls ein Boot von der Festplatte mittels DaniS506.ADD fehlschlgt, versuchen
Sie es von einer bootfhigen Floppy, CD oder ZIP.

Falls das auch nicht klappt, probieren Sie das Ganze mit den zustzlichen
Optionen /FORCEGBM /!BM.

Falls alles nicht funktioniert, aber ein Boot mit IBM1S506.ADD mglich ist, dann
besorgen Sie zumindest

 - die Ausgabe von "DumpIDE b > report.dmp"
 - die Ausgabe von "BldLevel DaniS506.ADD > report.bld"

Senden Sie die Infos bitte an "Daniela Engert" <dani@ngrt.de>. Vergessen Sie
bitte auch nicht, eine gltige Email-Adresse fr die Rckantwort im "reply-to"
Feld des Email-Kopfes anzugeben, ich werde sie nicht von Hand editieren!

Falls die Probleme beim CD-Brennen haben, versuchen Sie es erst einmal mit dem
Abschalten des Busmaster DMA Modus (/A:x /U:y /!BM); einige Brenner haben
Probleme mit dem DMA Modus.

