This package contains this file and 2 others.

DISKI.DSK - A 5 1/4" OS/2 2.0 Install diskette image.
DISKB.DSK - A 5 1/4" special diskette image required to allow you to
            install from the B: drive with 3 1/2" diskettes.

You will also need the LOADDF.ZIP file (LDF.COM on the NSC BBS) to create a 
working 5 1/4" diskette from the above 2 files.

The syntax to unpack the files is

      LOADDSKF DISKI.DSK A: (/F if you want to FORMAT)

        NOTE: Label this diskette Install Diskette.

      LOADDSKF DISKB.DSK A:

        NOTE: Label this diskette MODIFIED Install Diskette.

There is a file on the MODIFIED Install Diskette, README2 which I have
copied here... This is how to use the 2 diskettes in this package, and your
3 1/2" diskettes to install OS/2 2.0 WITHOUT altering your system setup
using both the A: bootable 5 1/4" diskettes created with these images and
the 3 1/2" diskettes OS/2 2.0 was shipped to you on.

--------------------

 This modified version of the 5.25 inch IBM OS/2 2.0 Diskette 1 allows
 you to install on a system with a 5.25 inch, 1.2 MB (bootable) drive A
 and a 3.5 inch, 1.44 MB drive B. To install, you will need a 5.25 inch
 IBM OS/2 2.0 Installation Diskette, this Diskette 1 and all of your 3.5
 inch Installation diskettes.

 To install, follow these steps:

        1.  Insert the 5.25 inch OS/2 Installation Diskette into drive A.

        2.  Insert the 3.5 inch OS/2 Installation Diskette 1 into drive
            B.

        3.  Turn on your computer or press Ctrl+Alt+Del.

        4.  When prompted, insert this modified version of the OS/2
            Installation Diskette 1 into drive A and press Enter.

            NOTE:  Do NOT remove this diskette from drive A until
                   hard disk preparation is complete.

        5.  The panels during install will ask you to remove
            the diskette from drive A and insert the next diskette
            into the drive.  At these panels, remove and insert
            the requested 3.5 inch diskettes into drive B.

