   What's New in Version 1.1 - Released August 16, 1996
   -----------------------------------------------------

   Bugs Corrected

   -Registered User's Name (in the Program Information screen) had extraneous
    characters following it.
   -Intermittent problem with the Zip routine not releasing "stdin".
   -Details View always came up checked regardless of what other view was also
    checked.
   -The Byte counts in the directories Window titlebar and the upper Status bar
    sometimes had an extra character appended to the count.
   -The 'Bytes Free' count in the directories Window titlebar was not updated
    when contents were moved to or from other directories on the same drive.
   -User-Defined programs were not able to run Rexx CMD files as stated in
    documentation.

   Improvements

   -Replaced listbox in Viewer's setup window with a drop-down combination-box
    for a more intuitive look.
   -For Info-Zip's Zip and Unzip support, the user has a choice of either
    entering a fully qualified Path/Name or adding the program's directory to
    the path statement in the Config.Sys file.
   -Added a Destination 'Bytes Free' count to the lower status bar.
   -Added a 'Refresh Display' option to update directories if other running
    programs have changed directory contents.
   -Added ability to User-Defined programs to take selected filename as a
    parameter
   -Added a built-in Zip Viewer for peering inside of zip files.  It allows all
    other viewers (graphics viewers, wav players) configured in File Freedom to
    be used inside a zip file. It also allows the user to look inside a zip file
    within a zip file, and again, all configured viewers can be used to
    examine files in this second layer.
   -General improvements to online Help to make it more comprehensive and
    comprehensible.

   What's New in Version 1.2 - Released September 15, 1996
   --------------------------------------------------------

   Bugs Corrected

   -a double display in the files window could occur if F8 (swap Source and
    Destination) was pressed twice or more times rapidly.

   Improvements

   -Added a Pushbutton and permanent Hot-Key for PMSeek.  This is an OS/2
    utility which allows searchs for text or duplicate files.
   -Added capability to create destination directories 'on the fly' for copy
    and move operations.
   -Added a Pushbutton for 'Refresh Display'.
   -Added support for more User-defined programs (now four) which can be run
    from within File Freedom.  Also improved support for these programs ie.
    a working directory can now be specified.  Also Windows and Dos programs
    will start in a windowed session.
   -Some minor improvements to the Settings Notebook within File Freedom.
   -More improvements to online Help.
   -The main reason for this update is to announce Ordering and Registration
    now available through BMT Micro and to include BMT Micro order form.

   What's New in Version 1.3 - Released October 19, 1996
   --------------------------------------------------------

   Bugs Corrected

   -User-Defined programs were unable to accept filenames passed to them as
    parameters due to added support for OS/2 filenames with embedded spaces.
   -Same problem with User-Defined Editor.  Both Dos and Windows programs
    will now accept valid filenames as parameters.
   -When displaying empty directories, status bar information did not give
    a valid '0' byte count and other minor aesthetic status bar errors.
   -When the the start-up default source drive was given in the form of
    "X:\" it would not display the root drive but would give a blank display.
   -When moving files and creating a destination directory on-the-fly, the
    first file moved would not be deleted from the source directory.

   Improvements

   -Added support for deleting complete sub-directory structures including
    those containing files and/or other directories.
   -Added support for zipping complete sub-directory structures or complete
    drives.
   -Improved color and font handling on titlebars and areas behind pushbuttons
    (for Drag and Drop colors and fonts).
   -Added separate Help reference for Settings Notebook and other Help
    improvements.
   -Changed "Quit" hot-key combination to "ALT-F4" in keeping with CUA
    guidelines.
   -Added ability to hide the ToolBar.
   -Added compatibility for 4OS2 and other alternative shells.
   -Added ability for User-Defined programs to continue running after
    File Freedom has been terminated.

   What's New in Version 1.4 - Released November 24, 1996
   --------------------------------------------------------

   Bugs Corrected

   -Fixed bug in support for OS/2 System Menu keys - all system menu
    keys now function properly (Alt-Spacebar, Alt-F4 etc.)
   -Fixed bug in Install program which prevented installation from root
    directories.

   Improvements

   -In  the "Rename" dialogue, the old file name now appears in the Entry
    field so that it can be edited.
   -The configured Editor will now continue to run if File Freedom is
    closed.
   -You can now create a Desktop Object from a program file by simply
    pressing Control-F7.
   -There is a new Unzipping option (Shift-F3) which will create a new
    directory on-the-fly (in the default destination) with the same name
    as the zip file and unzip the files into the new directory.
   -The cursor will now remember it's position in the file display during
    screen updates for most operations (Sorting, renaming, unmarking,
    copying etc.).

   What's New in Version 1.4a - Released December 1, 1996
   --------------------------------------------------------

   Bugs Corrected

   -Release 1.4 had inadvertently substituted a source file for the
    install program.  This was corrected.

   What's New in Version 1.5 - Released January 23, 1997
   --------------------------------------------------------

   Bugs Corrected

   -A bug in the internal zip viewer prevented files that had names
    with embedded spaces, from being extracted singly or viewed.

   Improvements

   -Drag and Drop file management has been added.  It is available
    without setup and co-exists with the original file management
    method.
   -A 'Delete File' option has been added to the internal Zip Viewer.
   -Files with an 'exe' extension can now be started from the Files
    Window with a double-click or by pressing the Enter key when
    the cursor is over top.

   What's New in Version 1.5a - Released February 9, 1997
   --------------------------------------------------------

   Bugs Corrected

   -A bug that caused the current drive setting to be lost after
    certain drag & drop operations.
   -A bug that prevented running programs from within a zip file.

   What's New in Version 1.6 - Released April 18, 1997
   --------------------------------------------------------

   Bugs Corrected

   -The Settings Notebook page would disappear when Escape was pressed
    but the notebook would remain with an empty page.
   -problems in internal Zip Viewer that prevented file extraction and
    deletion of files with embedded spaces in their file names.
   -Renaming a sub-directory in a folder that was displayed as open in
    the tree view window would cause a program abort.

   Improvements

   -Added a File list to the Zip Files window.  Now the user can choose
    a previously created zip to add files to without retyping the name.
   -External viewers no longer have to be in a directory in the Path=
    statement only.  They can now be located in the File Freedom home
    directory as well.
   -EPM (the Enhanced Editor) may now be used in Browse (read only)
    mode when specifying it as a viewer, by entering "<epm>" as the
    viewer name.  See help for more info.  This is now the default
    viewer.
   -The Desktop would become blocked when copying or moving files to
    slow peripherals (floppy drives etc.).  This is now done in a
    separate thread that uses semaphores to block other procedures that
    may be dependant on these operations being complete.  This has the
    effect of allowing multitasking while waiting on slow operations.
   -Many 'Fit and Finish' items that should improve all around ease of
    use, mainly concerned with the way file names are returned to and
    screens updated after operations that can change a directory's
    content.

   What's New in Version 1.6a - Released April 27, 1997
   --------------------------------------------------------

   Bugs Corrected

   - Error codes were suppressed during Copy and Move operations
   - Unzip would cause File Freedom to abort after unzipping

   What's New in Version 1.7 - Released August 1, 1997
   --------------------------------------------------------

   Bugs Corrected

   - Program would not operate after being closed from a minimized icon
     and system was rebooted.

   Improvements

   - Copying of complete directory trees now as simple as copying files.
   - Calculate the size of all files within selected directory tree
     structures (in bytes) with Control-S.
   - File attributes are now displayed beside the file names when
     changing file attributes.
   - In the Files window, sub-directory names are now coloured blue to
     distinguish them from file names.
   - Sort options are now saved session to session.
   - Auto-Scrolling in Files window while marking files with mouse.
   - Execute .bat and .cmd (as well as .exe) files by double-clicking
     on them or pressing the Enter key.

   What's New in Version 1.71 - Released September 1, 1997
   --------------------------------------------------------

   Bugs Corrected

   - The Copy Tree operation would not always complete the job if the
      source path was longer than the destination path.
   - The Copy Tree operation would try to self-replicate the source
      directory in the destination directories infinitely if the
      destination directory was a decendant of the source.
   - When executing '.bat' or '.cmd' files or executables, the start-up
      directory was not set to the directory containing the file.  This
      caused problems with the program finding it's resources such as
      help files etc.
   - Various bugs in the Zip and Unzip functions that prevented
      Info-Zip from handling directory and file names with embedded
      spaces in them under certain conditions.

   Improvements

   - Changed the default button in the 'Copy Tree' dialogue box to "OK".
   - Added some functionality to the Drag/Drop routines.  Files can now
      be dropped on sub-directories within the Files Window as well as
      anywhere else in the Files Window which will produce the source
      directory as destination.
   -  Drag and Drop is now possible between multiple instances of File
      Freedom (first check the "Create new window" setting under
      "Object Open behaviour" in the "Window" settings page under the
      File Freedom object's "Properties" or "Settings".

   What's New in Version 1.8 - Released October 21, 1997
   --------------------------------------------------------

   Bugs Corrected

   - No bugs identified.

   Improvements

   - New interface for Install program.
   - Error handling improved for SYS 0039 (Drive Not Ready).  File
     Freedom will now abort operation and continue if choice is
     "Return Error code to Program".
   - Small modification to "Viewers" page in Settings Notebook that
     makes "Accept" key a more obvious requirement to lock in changes.
   - Small change to "Update.cmd" to allow user to bail out and make
     changes.
   - Program names for the four User-defined Programs can now be set
     in the "Users" page of the Settings Notebook.  These names will
     show up in the menu under "Options".
   - A way to hop around your most frequently used directories has been
     implemented through the use of Directory Bookmarks.  A new button
     has been added to the row of Drive buttons (it has an asterisk on
     it) which displays a list of ten possible Directory paths which
     can be selected and loaded into the Files window with a mouse
     double-click or Enter key.

   What's New in Version 1.9 - Released Jan. 12, 1998
   --------------------------------------------------------

   Bugs Corrected

   - If the destination directory was deleted, swapping the source and
     destination and subsequently trying to set the source (now missing)
     as destination, would crash the program.
   - The Default Source Path setting in the Settings Notebook was
      mistakenly limited to 32 characters.  It now will accept a full
      256 character path name.
   - In the settings notebook, on the 'Viewers' page, resetting Viewer
     Defaults could cause the program to crash under some circumstances.
   - The internal Zip Viewer would crash the program on exit, if a drive
     button was pressed while the Zip Viewer was still running.

   Improvements

   - Added dynamic Volume Label display for the Drive button bar.  Place
     the mouse over the drive button to see the volume label displayed
     on the status bar.
   - Added a Volume Labelling function to compliment the above.  All
     local drives can have volume labels added or modified easily.
   - If a second instance of File Freedom is opened, it will now remember
     its last position and size.
   - The names of Viewers on the 'Viewers' page in the settings notebook
     can now have pathnames of up to 50 characters.  This will remove
     the neccessity of having the viewers located in a directory found
     in the PATH statement or in the File Freedom home directory.
   - The drive table, as well as the files display, is now refreshed when
      the manual 'Refresh' button (or Shift-F12) is pressed.  This is
      mainly useful for network users who want to verify that all drives
      are still online.
    - There is a new page in the settings notebook for setting up timers
      to allow automatic refreshing of the Directories and Files displays
      as well as automatic refreshing of the Drive table.  The intervals
      can be set from 1 second to 600 seconds (ten minutes) in one
      second intervals.  This enables the Drive button bar and the Files
      list and Directory content to be updated automatically.  This is
      mainly useful for network users who want to be sure that the
      resources displayed are current.

   What's New in Version 1.9a - Released Jan. 25, 1998
   --------------------------------------------------------

   Bugs Corrected

   - The new 50 character limit for viewer path/names did not work.  It
      was allowing 50 characters to be entered, but was only saving 11.

   This was the only change for v1.9a

   What's New in Version 1.9b - Released Mar. 15, 1998
   --------------------------------------------------------

   Bugs Corrected

   - Set "Source as Destination" wouldn't work on a floppy if there were
     no files already on the floppy.
   - The "Directory Tree Size" for a directory that had less than 100 bytes
      would drop a digit when reporting.
   - The Destination path was changing to an incomplete path after cancelling
      some Drag and Drop operations.
   - The internal Zip Viewer could not deal with Destination directory names
      that had embedded spaces.  It would create directories with truncated
      names and unzip files to these newly created directories.
   - When changing directory names, if the directory being renamed also
      happened to be the Destination directory, the Destination path was
      not updated to reflect this change.

   What's New in Version 2.0 - Released June 14, 1998
   --------------------------------------------------------

   Bugs Corrected

   - Some strings for User Defined Programs were not saved properly in some
     odd circumstances.
   - Finally resolved that mysterious "shrinking window" problem.
   - The Refresh page in the Settings notebook had a corrupted format in some
     cases.
   - The internal Zip viewer couldn't unzip to the root directory of the home
     drive.
   - If the setting for the Default Source path in the Settings Notebook was
     filled in, but the Default Destination path was left blank, the path would
     be corrupted when the Source and Destination were swapped.
   - If the Destination directory was deleted, the destination would be obsolete.
     Now, the parent directory is substituted.

   Improvements

   - Icons now are presented in 40 x 40 format in screen resolutions above
     800 x 600.
   - Sort options have been expanded to include Reverse Sort for all types.
   - A Pop-Up Menu is now available by clicking the second mouse button.
   - Greatly improved functionality in the Directory Tree view window.
     These operations are now available from this window.
        1) Delete and Copy folders
        2) Rename Folders
        3) Tree Size
     Also the display in this window has been improved.  Folders now open
     if the window is refreshed and open folders are more centered in the
     window.  This is also true for bookmarks and when swapping between
     source and destination.
   - When copying files to a file that already exists, if the "Replace Existing
     Files" checkbox has not been marked,  a small window will open to query if
     you wish to overwrite.
   - It is now possible to configure a different search tool than PMSeek.  See
     the "Search" page in the settings notebook.
   - Tab sizes in the settings notebook have been increased to facilitate
      larger fonts and higher resolutions.
   - An "Extract to Path" option has been added to the internal Zip viewer.
     You can now extract files to the destination stripped of their archived
     path, or extract to the archived path which will be created in the
     destination if it doesn't exist.
   - Improved positioning of the Bookmark window.
   - When a directory is created, the Files window will be scrolled to the
      new entry.
   - User-defined programs that have not been defined, now show up as
     disabled in the menu.
   - The date format used in the detailed view of the files list, now conforms
     to the Country setting.
   - Four more User-Defined program links have been added.
   - User-Defined programs selected via hot-keys now open in the foreground
     instead of the background.
   - A new Append feature has been added.  This allows selected files to be
     concatenated to an existing (or new) file.  This is for use with text
     files.  A separator is also written to the file that identifies the
     original file name and serves as an easy-to-find marker.

   Note:
   Some key assignments have been changed.  The Create Desktop Object hot-key
   has been changed from Control-F7 to Control-F11.  Also the hot-keys for
   User-Defined programs have all been changed.

   What's New in Version 2.01 - Released Sept. 27, 1998
   --------------------------------------------------------

   Bugs Corrected

   - Using 'Move' with overwrite of existing files in some cases would result
     in the source file not being removed after it was moved.

   - When Dragging and Dropping multiple files to an external program, multiple
     instances of the receiving program would open, but all would contain the
     same file.

   Improvements

   - File Freedom is now Freeware!  All registration checking code has been
     removed.  This has also removed the need for the install/uninstall programs
     and so the entire zip package will be smaller.

   What's New in Version 2.02 - Released Oct. 11, 1999
   --------------------------------------------------------

   Bugs Corrected

   - A Y2K bug that didn't allow sort order by date to put ascending
      or decending dates in the proper order for years later than 1999.

   Improvements

   - File Freedom source code has been released into the public domain.
     Udates are now YOUR responsibility!  :)

