-------------------------------------------------------------------------------
Hewlett Packard - use your finger/stylus to operate OS/2 (ArcaOS,eComStation)
-------------------------------------------------------------------------------

Provides tools to ease the development and integration of digitizer and touch
screen solutions into the system. Applies to Hewlett Packard (COM) only.

-------------------------------------------------------------------------------
comraw.cmd - obtain raw digitizer data from com port
-------------------------------------------------------------------------------

Default: Writes raw input data obtained from COM1 into the 19200.RAW file.

Usage: COMRAW [BAUD] [PORT]
Usage: COMRAW [PORT] [BAUD]

BAUD - Use: 9600,19200,38400 to specify baud rate to be used.
PORT - Use: 1,2,3,4 for port COM1,COM2,COM3,COM4 repectively.

-------------------------------------------------------------------------------
decode.cmd - decode raw digitizer data
-------------------------------------------------------------------------------

Default: Displays digitizer events from the 19200.RAW file.

Usage: DECODE [FILE]

FILE - Use: 9600.RAW,19200.RAW,38400.RAW or any other valid file name.

-------------------------------------------------------------------------------
tc4200rs.cmd - Hewlett Packard tc4200 stylus events to xsmouse.sys
-------------------------------------------------------------------------------

Input from COM1 port at 19200 baud. Output in screen coordinates.
Writes tc4200rs.log file.

-------------------------------------------------------------------------------
tc4200tc.cmd - Hewlett Packard tc4200 stylus events to xsmouse.sys
-------------------------------------------------------------------------------

Input from COM1 port at 19200 baud. Output in stylus coordinates.
Writes tc4200tc.log file.

