Welcome to UPS Monitor for OS/2.


I N T R O D U C T I O N

UPS Monitor is designed for the
smart signaling APC UPS models
Back-UPS Pro and Smart-UPS.
UPS Monitor is designed for
cable number 940-0095A and
940-0024B or C (shown
on the cable connector). Consult
your UPS manual to find out if
your UPS uses smart signaling.

UPS Monitor is also available for
the simple signaling APC models
Back-UPS and Back-UPS Office and
contact closure UPS made by
Tripplite and others. Please see
http://home.att.net/~LPAInfo/upsmonitor.html
for more information.


I N S T A L L A T I O N

Note: If you run Warp 4, fixpack 10
      and Object REXX, you must switch
      to classic REXX to install UPS
      Monitor. After installation, you
      can switch back to Object REXX.


  To get started with UPS Monitor quickly,
  please do the following:

  1. Install UPS Monitor

     - Unzip the program archive into a
       separate, temporary directory,
       with the name UPSMINST for example.
       That directory MUST be separate
       from the final directory (UPSMON
       by default).

     - Open an OS/2 command prompt, change
       to the drive and directory where
       you put the UPS Monitor files and
       run UPSMINST.EXE

     - The self-extracting installation
       program will put a folder with all
       the UPS Monitor program objects
       onto your desktop. Simply follow the
       prompts given. A reboot after
       installation is NOT required.

     - Copy UPSMONS.INI from the previous
       version over to the new UPS Monitor.

  2. Run UPS Monitor by double-clicking on
     the UPS Monitor icon. To display help,
     simply press F1 anywhere inside the
     program.



U N I N S T A L L A T I O N

Run UNINSTAL.CMD inside the UPS Monitor folder
which will completely remove all UPS Monitor
files and objects from your system. No reboot
is required.


Support: LPAInfo@att.net
Website: http://home.att.net/~LPAInfo
